Troubleshooting of medical oxygen cylinders

Dec 19, 2022

Suspected fault solution No oxygen output: After turning on the switch of the oxygen cylinder, if there is no oxygen coming out, check the pressure gauge reading if it does not reach zero, observe whether the flow adjustment knob is closed, open it to output oxygen.
The oxygen cylinder cannot be closed or opened: In some cases, the user confuses the direction of the main switch, and the above problems are likely to occur when the oxygen cylinder switch is turned to the maximum.
Note: The oxygen cylinder switch should be off when not in use. The strength to close the switch should be such that no oxygen leaks out (the moisture bottle does not bubble). Excessive force to close the switch will reduce the service life of the switch.

You Might Also Like