Introduce The Working Characteristics Of Oxygen

Oxygen is an extremely widely used product in the medical industry. In order to let operators fully understand this product, the following will introduce the operation and use knowledge of this product for you. I hope you can use this article better. This product creates more profits for you!
Oxygen cylinder is a high-pressure container for storing and transporting oxygen. It is generally made of alloy structural steel by hot stamping and pressing, with an outer diameter of 219mm, a volume of 40 liters, and a cylindrical shape. The shoulder of the gas cylinder is marked with the manufacturer's name, serial number, actual weight, working pressure, actual volume, manufacturing date and steel stamp of the manufacturer's inspection mark. It is painted sky blue as required, and the word "oxygen" is written in black. A technical inspection shall be carried out every three years during use. There is a cylinder valve for controlling oxygen on the oxygen cylinder, which is made of bronze or brass, has a hand wheel to open and close, and has a pressure relief hole.
At the workplace, oxygen cylinders should be fixed upright with chains or special clips; when they cannot stand upright due to conditions, the head of the cylinder should be raised and placed on the ground. Before use: first check whether the mouth of the bottle is clean and whether there is any oil stain. After installing the pressure reducer, slowly open the bottle valve to check whether there is any air leakage and whether the pressure gauge indicates flexibly. After everything is normal, the leather tube can be connected to work. The oxygen cylinder warehouse should be a single-story, light-weight roof, and a second-class fire-resistant building; the ground should be made of materials that will not spark when impacted; it is forbidden to pile up flammable and explosive materials and use open flames within ten meters around; oxygen cylinders should be Place it upright and add a fence to prevent it from falling; when it is stored in the open air, it must be covered with a shelter. When stopping work, the cylinder valve should be closed and the pressure reducer should be removed; the gas in the oxygen cylinder cannot be used up, and a pressure of 0.5~1.0Kg/cm2 should be left.